 |
DLS ULTIMATE A5 3 CHANNEL POWER AMP Details:
|
ULTIMATE series A5, a three-channel amplifier rated at 2 x 85 Watts in stereo an 1 x 300 Watts in mono. In two ohm load it delivers 2 x 100 Watts in stereo and 1 x 500 Watts in mono. The mono channel is 1 ohm stable. Built-in fan control. Built-in, variable 50-125 Hz switchable high-pass filter and a 40 - 90 Hz low-pass filter for subwoofers. The sub channel is also equipped with a disconnectable 25 Hz subsonic filter.
The perfect amplifier for a good front system and one or more subwoofers in the trunk. Remote sub level control that includes phase shift control 0-180 degrees. |
 |
| RMS output per channel at 13,8 volts, 20 Hz - 20 kHz , < 0,1% distortion. |
| Mode |
: AB |
| Number of channels |
: 3 |
| Output power in 4 ohm |
: 2 x 85 W |
| Output power in 2 ohm |
: 2 x 100 W |
| Mono channel, ouput power in 4 ohm |
: 300 W |
| Mono channel, output power in 2 ohm |
: 500 W |
| Mono channel, output power in 1 ohm |
: 780 W |
| S / N ratio, A-weighted |
: > 100 dB |
| Damping factor |
: > 200 |
| Input impedance |
: > 10 kohm |
| Input sensitivity, variable |
: 0,2 - 7 V |
| Filter, front channels |
: Highpass: 50-125 Hz |
| Filter, mono channel |
: Lowpass: 40-90 Hz. Subsonic: 25 Hz |
| Phase shift control 0-180 degr. |
: Yes |
| Remote sub level control with phase control |
: Yes |
| Terminal for external cooling fan |
: Yes |
| Dual DC-inputs |
: No |
| Current draw, idle |
: 0,5 A |
| Current draw, maximum |
: 90 A |
| Dimensions W x D x H |
: 410 x 240 x 73 mm (16,15 x 9,45 x 2,87 inch) |
| Weight |
: 6,6 kg ( 14,55 lb) |
|
